How to Display Your Witcher Ronin Lithograph by Jen Bartel

Quick answer

To display your Witcher Ronin lithograph by Jen Bartel, frame it with UV-protective glass and an acid-free mat, hang it out of direct sunlight at eye level, and dust it gently with a dry microfiber cloth. Avoid damp walls and extreme temperatures to prevent warping or fading.

You’ve got the Witcher Ronin lithograph by Jen Bartel—now you want it on the wall without risking creases, fading, or a crooked hang. This guide walks you through framing, placement, and long-term care so the artwork stays as striking as the day it arrived.

The steps below assume you’re working with a standard-sized lithograph. If your print came rolled, give it time to relax before framing. And if you’re still sorting out the rest of your display, a few other Witcher pieces can tie the space together without stealing the spotlight.

Choose the right frame and mat

A frame does more than look good—it protects. For a lithograph, look for UV-filtering glass or acrylic and an acid-free mat or backing. Acidic materials can yellow the paper over time, and UV light will fade the inks. If you’re framing on a budget, prioritize UV protection over decorative moulding.

Measure your lithograph before buying anything. Standard sizes like 18x24 or 24x36 are common, but if your print is an odd size, custom framing is worth the cost. Avoid frames that press directly against the artwork; a mat or spacers keep the glass off the surface.

• Check the frame’s backing—if it’s corrugated cardboard, replace it with acid-free foam board.
• Skip non-glare glass unless you really need it; it can dull the colors.

Hang it where light and moisture won’t ruin it

Direct sunlight is the enemy. Hang your lithograph on an interior wall away from windows, radiators, and air vents. Bathrooms and kitchens are risky because of humidity, which can cause ripples. A hallway, living room, or dedicated display area works best.

Eye level is around 57–60 inches from the floor to the center of the artwork. If you’re hanging it above furniture, leave 6–8 inches between the bottom of the frame and the top of the sofa or console. Use two hooks for larger frames to keep it level.

• Use a level app or a spirit level—don’t eyeball it.
• For heavy frames, anchor into a stud or use drywall anchors rated for the weight.

Handle and clean with care

When framing, handle the lithograph by the edges with clean, dry hands or cotton gloves. Oils from your fingers can stain the paper. If you need to unroll it, place it between two clean sheets of acid-free paper and weight it down for a few hours.

For routine cleaning, dust the frame and glass with a dry microfiber cloth. If the glass needs more, spray a little water or glass cleaner onto the cloth—never directly on the frame—and wipe gently. Don’t use paper towels, which can scratch.

• Never use cleaning sprays on the artwork itself.
• If you notice condensation inside the glass, take it to a framer to reseal.

Coordinate with other Witcher displays

A lithograph can anchor a gallery wall, but mixing sizes and mediums keeps it interesting. Pair it with smaller collectibles like The Witcher Butcher of Blaviken Vinyl Figure or a Cyberpunk Edgerunners David’s Apartment Shadowbox for a cohesive but varied look. Keep spacing consistent—2–3 inches between frames is a good rule.

If you’re displaying apparel or accessories nearby, fold them neatly or use hooks so they don’t compete with the art. The goal is to let the lithograph breathe while still showing off your fandom.

• Lay out your arrangement on the floor before hammering any nails.
• Take a photo of the layout to reference while hanging.

Your step-by-step display plan

1. Unroll and flatten: If your lithograph arrived rolled, place it between two clean sheets of acid-free paper and weight it down for a few hours. Avoid direct heat or sunlight. Checkpoint: The print should lie flat without curling at the edges before you frame it.
2. Measure and choose a frame: Measure the print’s exact dimensions. Select a frame with UV-protective glass and an acid-free mat or backing. If it’s a non-standard size, get a custom frame. Common mistake: Buying a frame that’s too tight, which can bend the corners.
3. Prep the hanging spot: Pick an interior wall away from direct sun, vents, and damp areas. Mark the center at 57–60 inches from the floor. Use a level to draw a faint line for the top of the frame. Checkpoint: The wall should be dry and clean—no peeling paint or moisture.
4. Install hanging hardware: For frames up to 10 lbs, use two picture hooks spaced a few inches apart. For heavier frames, anchor into a stud or use drywall anchors rated for the weight. Measure twice before drilling. Common mistake: Using a single nail for a large frame, which lets it tilt.
5. Hang and level: With a helper, lift the frame onto the hooks. Check level and adjust as needed. Press gently at the bottom corners to seat it against the wall. Checkpoint: The frame should sit flush and not wobble.
6. Clean and maintain: Dust the frame and glass weekly with a dry microfiber cloth. If needed, spray glass cleaner onto the cloth—not the frame—and wipe. Keep the room’s humidity stable. Common mistake: Spraying cleaner directly on the frame, which can seep behind the glass.

Witcher gear that complements your display

• THE WITCHER BUTCHER OF BLAVIKEN VINYL FIGURE: This item is officially licensed by CD PROJEKT RED for The Witcher 3 video game. It’s a small, shelf-friendly piece that can sit below or beside your lithograph without overwhelming it.
• CYBERPUNK EDGERUNNERS DAVID'S APARTMENT SHADOWBOX: Shine a spotlight on David’s backstory with this shadowbox, which depicts a megabuilding apartment in Night City. A shadowbox adds depth to a gallery wall and works well when hung near a lithograph for a mixed-media display.

With the right frame, a smart spot, and a little routine care, your Witcher Ronin lithograph by Jen Bartel will stay vivid for years. Take your time with the steps above, and don’t be afraid to rearrange until it feels right.