Back to Blog
Tips & Care 2026-11-16 CD PROJEKT RED US Gear Store – CD PROJEKT RED Gear 0 views

Cyberpunk Edgerunners 2 iPhone Case: Care and Daily Use Tips

Cyberpunk Edgerunners 2 iPhone Case: Care and Daily Use Tips

Keep your Cyberpunk: Edgerunners 2 iPhone case looking sharp with a simple routine that limits yellowing, protects the artwork, and matches how you actually use your phone.

Start with the two things that damage this case most

The Cyberpunk: Edgerunners 2 iPhone Case is built from a polycarbonate outer shell and a thermoplastic polyurethane (TPU) inner liner. That combination gives you a rigid, matte back with a slightly flexible bumper, but the materials also come with two specific care warnings: high-alcohol liquids can rub off the design, and direct sunlight can cause yellowing. Your daily routine should focus on avoiding those two risks first, then add general cleaning and handling habits around them.

What the case is made of and why it matters

  • CYBERPUNK: EDGERUNNERS 2 IPHONE CASE: Dual-layer construction: polycarbonate outer shell and thermoplastic polyurethane (TPU) inner liner. The hard shell protects against scratches and impacts, while the TPU liner helps absorb shock. Each material responds differently to cleaners and heat, so you need a method that is gentle on both.
    CYBERPUNK: EDGERUNNERS 2 IPHONE CASE
    CYBERPUNK: EDGERUNNERS 2 IPHONE CASE
  • CYBERPUNK: EDGERUNNERS 2 IPHONE CASE: Matte finish with precisely aligned port openings. The matte surface hides fingerprints better than gloss, but it can still trap oils and dust. Aligned openings mean you can clean around the ports without removing the case every time, though removing it for a deeper clean is still wise.
  • CYBERPUNK: EDGERUNNERS 2 IPHONE CASE: Induction charging compatible. You can leave the case on a wireless charger, but heat from charging can accelerate yellowing over time. Keep an eye on how warm your phone gets during charging and avoid leaving it in direct sun afterward.

A weekly cleaning routine that protects the print and the shell

These steps use only what the supplied information supports. Avoid alcohol-based wipes, sprays, or solvents because the case disclaimer explicitly warns that high-alcohol liquids may rub off the design.

  1. Remove the case and shake out loose grit: Take the phone out of the case and tap the case gently over a trash bin to dislodge dust and sand. Grit trapped between the case and phone can scratch the phone or the case's inner liner over time.
  2. Wipe with a soft, slightly damp cloth: Use a microfiber cloth dampened with plain water. Wring it out so it is not dripping. Wipe the matte back and the sides in gentle circles. Do not scrub hard on the printed artwork.
  3. Clean the port openings with a dry brush: A clean, dry soft-bristled brush (like a clean toothbrush) can lift dust from the port cutouts. Avoid pushing anything sharp into the openings, and do not use liquid directly on the ports.
  4. Dry completely before reassembly: Let the case air-dry fully before putting your phone back in. Moisture trapped inside can fog the camera lens area or affect the phone. A dry microfiber cloth can speed this up.

How to slow down yellowing on the TPU liner

Yellowing is a known risk for clear or light-colored TPU, and the case disclaimer specifically says to keep the case away from direct sunlight to prevent it. The polycarbonate shell is less prone to yellowing, but the TPU inner liner and any clear edges can still discolor over time. You cannot reverse yellowing once it starts, but you can slow it down by storing your phone out of direct sun, especially on car dashboards or windowsills. If you use a wireless charger, avoid leaving the phone on the charger long after it reaches full charge, since excess heat can speed up the process. Also keep the case away from high-alcohol liquids, which can degrade the TPU and make it more prone to clouding or yellowing.

Design and artwork care

  • CYBERPUNK: EDGERUNNERS 2 IPHONE CASE: Features official artwork from the upcoming standalone anime series Cyberpunk: Edgerunners 2. The printed design is the main reason to choose this case, so cleaning methods that protect the print are essential. Avoid abrasive pads, alcohol, and harsh chemicals.
  • CYBERPUNK: EDGERUNNERS 2 IPHONE CASE: Disclaimer: Keep away from liquids containing high alcohol levels as designs on the phone case may rub off. This is a direct instruction from the product record. Hand sanitizers, alcohol wipes, and some screen cleaners fall into this category. Check the ingredient list before using any cleaner near the case.

Daily habits that extend the case's life

Small habits make a bigger difference than occasional deep cleans. Keep your phone out of direct sunlight when you are not using it, especially in a car. Avoid tossing the phone into a bag with keys or coins, which can scuff the matte finish. If you work in a dusty or gritty environment, rinse the case with plain water more often, but always dry it thoroughly. And because this case is made to order, with up to an extra 5–7 business days for shipping and no cancellations or returns accepted, it is worth protecting from day one.

Quick compatibility check before you buy

  • Available sizes: The case is offered for iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 15, iPhone 15 Plus, iPhone 15 Pro, iPhone 15 Pro Max, iPhone 16, iPhone 16 Plus, iPhone 16 Pro, and iPhone 16 Pro Max. The product description also mentions Samsung models, but the supplied variant list only includes iPhone sizes, so check the store listing for Samsung options if needed.
  • Wireless charging: Induction charging is supported, so you can charge without removing the case. Keep an eye on heat buildup and avoid leaving the phone in direct sun while charging.

Related Articles

Customer Service
Home
Products
Cart
Profile