Back to Blog
Tips & Care 2026-11-15 CD PROJEKT RED US Gear Store – CD PROJEKT RED Gear 2 views

Geralt Toussaint Tourney Armor Figure: Display and Care Guide

Geralt Toussaint Tourney Armor Figure: Display and Care Guide

Set up your Geralt Toussaint Tourney Armor Figure with a stable shelf spot, controlled lighting, and a simple dusting routine that protects the Aard pose and fine armor details.

Start with the base, not the shelf

Before you pick a spot, look at what the figure stands on. The Geralt Toussaint Tourney Armor Figure comes with a 1.5-inch (3.81 cm) display base, and the figure itself stands 7.75 inches (19.68 cm) tall. That base is your anchor for stable statue shelf placement—it gives you a defined footprint to plan around and helps keep the figure upright when you move it for cleaning.

Choose a flat, level surface that can hold the figure without wobble. Avoid shelves that flex or vibrate, and keep the base away from the edge so a light bump does not send it over. A dedicated shelf or a sturdy cabinet top works better than a crowded desk where cables and keyboards get moved daily.

The dimensions that shape your display plan

  • THE WITCHER 3: WILD HUNT - GERALT TOUSSAINT TOURNEY ARMOR FIGURE: Figure height: 7.75 inches (19.68 cm); base height: 1.5 inches (3.81 cm). These measurements tell you how much vertical clearance you need and how much shelf depth the base occupies before you commit to a spot.
    THE WITCHER 3: WILD HUNT - GERALT TOUSSAINT TOURNEY ARMOR FIGURE
    THE WITCHER 3: WILD HUNT - GERALT TOUSSAINT TOURNEY ARMOR FIGURE

A stable shelf setup in four steps

  1. Clear and level the surface: Remove clutter and check that the shelf is level. A slight tilt puts stress on the base and makes the figure easier to knock over.
  2. Place the base first: Set the 1.5-inch (3.81 cm) base down where you want it, then position the figure on it. This keeps the pose centered and avoids dragging the figure across the shelf.
  3. Leave breathing room: Keep other collectibles and everyday objects far enough away that you can dust without bumping the sword or the armor details. The Aard sign pose has extended elements that are easy to catch.
  4. Do a stability check: Give the shelf a gentle nudge. If the figure shifts or the base rocks, move to a firmer surface before walking away.

Lighting that shows the armor without adding risk

The Toussaint knight's tourney heavy armor is packed with straps, rivets, and the Wolf School medallion, so the right light helps those details read from across the room. For figure lighting tips, aim a soft light from the front or slightly above rather than directly overhead. Harsh top-down light flattens the armor and casts the face into shadow.

Keep the figure out of direct sunlight and away from heat sources. Strong sun can fade colors over time, and heat can make display materials less stable. If you use a display lamp, position it so the bulb is not close enough to warm the figure. The supplied information does not confirm a specific safe distance or bulb type, so use your judgment and keep the light at a comfortable distance.

One honest trade-off: a bright spotlight makes the Aard pose dramatic, but it also highlights dust. If you prefer low-maintenance witcher collectible maintenance, a softer, diffused light will hide dust between cleanings better than a hard beam.

A dusting routine for armor details

Dust settles into the straps, rivets, and the medallion first. A gentle routine keeps those details visible without risking the finish. The supplied information does not include manufacturer cleaning instructions, so treat the following as general, conservative practice rather than a product-specific procedure.

  • Use a soft brush: A clean, soft-bristled brush—like a makeup brush or camera lens brush—lets you sweep dust out of crevices without pressing on delicate parts.
  • Work from top to bottom: Start at the head and shoulders, then move down the armor and base. This stops dust from falling onto areas you already cleaned.
  • Go light around the sword and Aard pose: The extended sword and sign-casting hand are the most exposed parts. Support the figure near the base while you dust rather than pulling on the arm or blade.
  • Skip harsh cleaners: Avoid solvents, abrasive cloths, and sprays. A dry soft brush is the safest starting point when no manufacturer cleaning guidance is supplied.

Color expectations before you set the scene

The product listing notes that monitor display variance can make your figure's colors look different from the images shown. That is worth knowing before you build a display around a specific color scheme. If exact color matching matters to you, view the figure in person under the lighting you plan to use rather than relying on a screen.

This is also a reason to avoid mixing very warm and very cool display lights on the same shelf. The armor will read differently under each, and the variation can make the figure look inconsistent with nearby collectibles.

What the figure includes

  • THE WITCHER 3: WILD HUNT - GERALT TOUSSAINT TOURNEY ARMOR FIGURE: The figure depicts Geralt of Rivia in Toussaint knight's tourney heavy armor from Blood and Wine, sword drawn as he casts the Aard sign. The extended sword and casting pose are the parts most likely to catch on nearby objects, so they should guide how much clearance you leave.
  • THE WITCHER 3: WILD HUNT - GERALT TOUSSAINT TOURNEY ARMOR FIGURE: The figure stands on a 1.5-inch (3.81 cm) display base and is detailed down to the last strap, rivet, and the Wolf School medallion. The base gives you a defined footprint for placement, and the fine details are where dust will collect first.

When to move it, and when to leave it alone

Every time you pick up the figure, you add a small chance of a drop or a snag. Clean in place when you can, and move the whole figure only when you need to reach behind it or relocate the display. If you must move it, lift from the base rather than the sword arm or the head.

For long-term witcher collectible maintenance, consistency beats intensity. A quick dust every few weeks is gentler on the finish than a deep scrub once a year. If you live in a dusty space or near a busy doorway, check the medallion and the armor straps more often—those recessed areas show buildup first.

Related Articles

Customer Service
Home
Products
Cart
Profile